Click Here Go to Our New Website:

UV Curable Wood Topcoats

 

VanUltra-580 UV Wood Topcoat

The VanUltra-580 UV wood topcoat provides smooth, uniform coverage.   Gloss can be adjusted to accommodate specific applications.  It also exhibits good adhesion to wood sealers as well as good inter-coat adhesion for additional coats that may be applied.  The VanUltra-540 UV wood sealer is highly recommended as the base seal coat.  The VanUltra-580 UV wood topcoat is an ultra low V.O.C. and ultra low H.A.P. topcoat that exhibits uniform coverage when applied to a sealed wood surface.  VanUltra-580 cures fast at a line speed of 50 FPM with one 300 WPI lamp.  It is very durable with a balance of superior hardness and flexibility required for wood coatings.  


VanUltra-581 UV Wood Topcoat

VanUltra-581 is a UV wood topcoat that exhibits excellent adhesion and durability.  It is designed to be easily sprayed, dipped, or brushed and has excellent leveling properties.  VanUltra-581 is a high solids UV curable epoxy that has an ultra low V.O.C. and H.A.P. content.  It exhibits uniform coverage when applied to a sealed wood surface, and is very durable with a balance of superior hardness and flexibility required for wood coatings.


VanUltra-582 UV Wood Topcoat

VanUltra-582 is 100% solids and can be used as its own sealer.   It is very sandable and has excellent adhesion when applied over itself.  VanUltra-582 exhibits uniform coverage when applied to a sealed wood surface, and it also exhibits a fast cure speed.  VanUltra-582 has been designed for vacuum coating application and can be modified for other applications.  It is very durable with a balance of superior hardness and flexibility required for wood coatings.


VanUltra-582 UV Wood Topcoat

VanUltra-583 is a UV aliphatic urethane wood topcoat that exhibits a high degree of gloss, clarity and non-yellowing properties.  It is designed to be easily sprayed, dipped, or brushed and has excellent leveling properties.  VanUltra-583 is a high solids coating and has been formulated to be very impact resistant and durable, and has a scuff and mar free surface.  It is an ultra low V.O.C. and H.A.P. UV topcoat, and exhibits excellent coverage on a number of wood substrates.


VanUltra-584 UV Wood Topcoat

The VanUltra-584 was designed specifically for spray application. It can be used as its own sealer because its very sandable and has excellent adhesion when applied over itself.  VanUltra-584 is a low viscosity, 100% solids UV coating that exhibits excellent flow and leveling.  It also exhibits uniform coverage when applied over a sealed wood surface.  The VanUltra-584 wood topcoat is a zero V.O.C. and zero H.A.P. coating, providing the ultimate in environmental compliance.  And with the ease of application, excellent leveling properties and great coating durability, using the VanUltra-584 results in a high quality finish!


VanUltra-585 UV Wood Topcoat

VanUltra-585 was designed for roll coat applications.  It exhibits excellent flow and leveling when applied over the VanUltra-545 UV wood sealer, which is highly recommended as VanUltra-585's base seal coat.  This system provides a smooth and uniform coverage.  The VanUltra-585 UV topcoat is ultra low V.O.C.'s and H.A.P.'s.  It exhibits a fast cure speed and the resulting product has excellent adhesion and durability.  It provides a balance of superior hardness and flexibility, required for wood coatings.


VanUltra-585 Lower Gloss UV Wood Topcoat

The VanUltra-585 Lower Gloss was designed for roll coat applications.   This is a modified version of the VanUltra-585 in that the gloss has been lowered for applications that would require it.  The VanUltra-585 Lower Gloss exhibits excellent flow and leveling when applied over the VanUltra-545 UV wood sealer, which is highly recommended as VanUltra-585 Lower Gloss's base seal coat.  It has also been successfully used as its own sealer.  This system provides a smooth, uniform coverage and great adhesion.  The VanUltra-545 Lower Gloss topcoat is ultra low V.O.C.'s and H.A.P.'s.  It exhibits a fast cure speed and the resulting product has excellent adhesion and durability.  It provides a balance of superior hardness and flexibility, required for wood coatings.


VanUltra-586 UV Wood Topcoat

VanUltra-586 was designed for roll coat applications.  This is a modified version of the VanUltra-585 Lower Gloss UV Wood Topcoat in that the formulation has been modified to provide a lower viscosity for the end user.  VanUltra-586 exhibits excellent flow, leveling, and adhesion when applied over the VanUltra-545 UV wood sealer, which is highly recommended as VanUltra-586's base seal coat.  The result provides smooth, uniform coverage.  VanUltra-586 has been successfully used as its own sealer.  The VanUltra-586 topcoat is ultra low V.O.C.'s and H.A.P.'s.  It exhibits a fast cure speed and the resulting product has excellent adhesion and durability.  It provides a balance of superior hardness and flexibility, required for wood coatings.


VanUltra-588 UV Wood Topcoat

VanUltra-588 was designed for roll coat applications.  This is a slightly higher gloss version of the VanUltra-586.  VanUltra-588 exhibits excellent flow, leveling, and adhesion when applied over the VanUltra-545 UV wood sealer, which is highly recommended as VanUltra-588's base seal coat.  The result provides smooth, uniform coverage.  VanUltra-588 has been successfully used as its own sealer.  The VanUltra-588 topcoat is ultra low V.O.C.'s and H.A.P.'s.  It exhibits a fast cure speed and the resulting product has excellent adhesion and durability.  It provides a balance of superior hardness and flexibility, required for wood coatings.


Duraslik UV Wood Topcoat

Duraslik, a UV wood topcoat provides for a smooth, slick surface to wood and other substrates. The DuraSlik coating is a specialty clear, gloss topcoat that is extremely slick, highly abrasion resistant, and durable. It is used where surfaces must be slick without the use of a lubricant.  Duraslik is V.O.C. and H.A.P. free.  It exhibits uniform coverage when applied to a sealed wood surface.  Duraslik has an excellent UV cure response, curing fast at a line speed of 50 FPM with one 300 WPI lamp.  It is very durable with a balance of superior hardness and flexibility required for wood coatings.



Back to UV Curable Wood Coatings


Important:  Technologies, Inc. makes no warranty, whether expressed or implied, including warranties of merchantability or of fitness for a particular purpose.  Under no circumstances shall Van Technologies, Inc. be liable for incidental, consequential or other damages, alleged negligence, breach of warranty, strict liability, tort, contract, or any other theory, arising out of the use or handling of this product.


For information on typical properties, technical questions, pricing, or to sample and purchase products, contact Van Technologies at:

5791 Bergquist Road
Duluth, MN 55804
218-525-9424
Fax: 218-525-5594
email: vantech@vtcoatings.com